Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cylinder Head Cover Gasket on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011

In this video, you will see how to remove and replace the cylinder head cover gasket on a second series Fiat Punto. First, lift the engine bonnet and unscrew the screws of the air filter to also remove the airbox and the intake hose. Then disconnect the rubber hose and the electrical connector and unscrew the screws of the cylinder head cover: simply remove the old gasket and replace it. Before refitting the new gasket, clean the gasket seat thoroughly and then reassemble it, ensuring it fits correctly in all points.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rocker Cover Gasket on a Fiat Punto
Replacing the Rocker Cover Gasket on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Let's see how to remove the rocker cover gasket on a Fiat Punto. First, remove the plastic soundproofing panel from the cylinder head and take it out…
How to Replace the Antenna Base Seal on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the antenna base seal on the Fiat Punto Evo, open the rear bonnet and remove the seal located in the tailgate, then remove the upper seal …
Guide to Replacing the Head Gasket on the Fiat Punto
Guide to Replacing the Head Gasket on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide will provide the instructions to remove the engine head and replace the gasket on the Fiat Punto. First, drain the engine oil into a conta…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos