Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement bulb on Fiat 500

Model: Fiat 500 500 L - Years 2012-2023
Part: Headlight bulb

Replacing burnt out bulbs? Let's see how they disassemble on a Fiat 500L. We lift the front hood of the car, find the inspection cap of the headlight (located in the rear part of the headlight) and remove it. We remove the lamp holders of the bulbs, take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We test the operation of the bulbs, then we cover the back of the headlight with the cover caps. We close the front hood.

Posted on 3 October 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Fiat 500 Abarth.
How to replace the front headlight bulb of the Fiat 500 Abarth.
Fiat 500 (2007-2024 / 312) The replacement of a front headlight bulb on a Fiat 500 Abarth vehicle follows the same steps used for replacing a front headlight bulb on a Fiat 500…
How to disassemble the lights of the Fiat 500 X ceiling light
How to disassemble the lights of the Fiat 500 X ceiling light
Fiat 500 (2014-2022 / 500 X) Replacing the ceiling light bulb of the Fiat 500 X is a simple and quick operation that can be done independently thanks to our short video tutorial …
Headlight bulb replacement on Fiat 500
Headlight bulb replacement on Fiat 500
Fiat 500 (2007-2021 / 312) Lift the hood and put on the special support rod. Replacing a light bulb on the Fiat 500 headlights is really simple, and now we will demonstrate it …

    Frequently Asked Questions

    • 500 2012-2023 - Which dipped beam bulbs are fitted on the Fiat 500L? Read answer

Removing Ignition Cylinder from Audi A3

In this video, you will see how to replace the ignition cylinder of the Audi A3. First, remove the side plastic cover where the fuses are located: take out the blue 1 Amp fuse. Next, disconnect the battery terminals. Now, connect the cables that run to the steering and remove the central part by pulling it towards you (the airbag). Disconnect the connector by removing it completely. Remove the two screws to take off the plastic cover of the ignition: disconnect the various control units and use a drill to break the seal of the ignition lock to remove it.

Watch the video!


by ScegliAuto

More videos