Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

Replace the damaged bulbs in the rear light? Remove the light to replace the bulbs on the Fiat 500. Open the boot, unscrew the securing screws on the sides of the light. Remove the rear light from inside the bodywork (use a lever if needed).

Disconnect the bulb holders from the light: replace the damaged bulbs with new ones (voltage and size equal to the original). Close the bulb holder in the light and secure it inside the car's bodywork.

Screw in the securing screws on the side of the light. Test the operation of the light with the control levers.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Fiat 500
How to Replace the Rear Light Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) Open the rear hatch of the boot and secure it. Identify the rear light and unscrew the securing screws located at the sides of the light (screws at t…
Replacing Headlamp Bulb on Fiat 500
Replacing Headlamp Bulb on Fiat 500
Fiat 500 (2007-2024 / 312) Are the bulbs in the headlamp of your Fiat 500 blown? Here's how to change them. Open the front bonnet by pulling the lever located at the bottom rig…
How to Change the Front Headlight Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) Do you want to change the front headlight bulbs on a Fiat 500? Let's see how to proceed in this guide video. Open the bonnet by pulling the lever loc…

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos