Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Seats from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Seat

In today's video tutorial, you will see the essential steps to remove the rear seats from a Fiat Panda, as well as from other models of the manufacturer. First, gather some hex keys; then unscrew the bolts located at the bottom of the bracket, using some penetrating oil if they are difficult to remove; next, lift the rear bench manually to remove it and unscrew the other bolts on the brackets to remove the backrest. For reassembly, apply the reverse procedure, fitting the backrests first and then the bench.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats from a Fiat Panda?
How to Remove the Rear Seats from a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the rear seats from a Fiat Panda, first, remove the carpet covering the boot and loosen the four bolts it previously covered. You will also…
How to Remove the Rear Seats from the Fiat Panda 169
How to Remove the Rear Seats from the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, see how to remove the rear seats from the Fiat Panda 169, second series, in simple steps. First, open the rear doors and s…
Removing Front and Rear Seats on a Fiat Panda MK1
Removing Front and Rear Seats on a Fiat Panda MK1
Fiat Panda (1980-2003 / 141, MK 1) In this video, we will see how to remove the front and rear seats on a first-generation Fiat Panda 4x4, following the instructions below. First, open…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos