Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Seat

Before you begin, you will need a 16 mm socket spanner, then enter the interior of your Fiat Panda. Start by unscrewing the two lower bolts using the mentioned socket spanner. Once done, exit the cabin of your Panda and open the rear hatch of the boot to remove the lower cover and the spare wheel. By doing this, you will access the bolts that secure the seat backrest. Proceed to unscrew these bolts as well, using the same socket spanner. At this point, you can extract the rear seats, completing the removal process.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Seats from a Fiat Panda
Removing Rear Seats from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In today's video tutorial, you will see the essential steps to remove the rear seats from a Fiat Panda, as well as from other models of the manufactu…
Replacement of the fuel pump of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's main steps will show us how to disassemble and replace the fuel pump of the Fiat Panda, following the instructions below. First, we open the …
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos