Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Rear Bumper on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Rear bumper

How do you fit the rear bumper of the car? Let’s see how to mount the bumper on the Punto. Take the bumper and position it perfectly on the body of the vehicle. Then, using a socket wrench, tighten the securing bolts at the top of the bumper. Next, start tightening the bolts around the wheel arch liners of the car. After securing the bolts around the bumper, tighten the bolts at the bottom of the vehicle, between the chassis and the bumper (if present on the model). At the end of the installation, check the anchoring of the plastics near the bodywork. Secure the plastic covers over the screws.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fit the Front Bumper on Fiat Grande Punto
How to Fit the Front Bumper on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to fit the front bumper on a Fiat Grande Punto? Follow these steps; it’s not too complex if done in order. First, take the bumper and align it pe…
How to Remove the Front Bumper on a Fiat Punto EVO?
How to Remove the Front Bumper on a Fiat Punto EVO?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will see how to remove the front bumper on a Fiat Punto EVO, a very simple and quick operation. First, open the bonnet, then un…
How to Remove the Rear Bumper of a Fiat Grande Punto
How to Remove the Rear Bumper of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Remove the rear bumper of a Fiat Grande Punto. Follow these steps carefully. First, use a screwdriver (or battery-powered drill) to remove the screws…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos