Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Removing the Fiat 500 door panel

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Door panel
Operation: Removing the Fiat 500 door panel

Let's take the driver's door as an example. Using a plastic lever, remove the round screw cover next to the handle, then also remove the one in the "handle" next to the window lifting buttons. Unscrew all the screws now uncovered. Now move on to the small round screw cover at the bottom and left of the door: remove it and unscrew the bolt that covered it, finally do the same thing with the waist still on the left but this time at the top, towards the window. Remove the panel. Now you just need to disconnect the two connectors (one is related to the window lift button and the other to the speakers) and that's it.


Posted on 30 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2023 - Why won't the trunk of the Fiat 500 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos