Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Armrest Storage Compartment on Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Dashboard

See other generations:
Video tutorial

Slide the front seats forward as far as possible, until they reach the end of their travel. Similarly, fold the backs of both seats forward, again to the end of their travel.

Mount the armrest onto the flat part of its support by screwing in the four screws. Now attach the brackets to the sides of the armrest support: there are many holes so you can adjust them to your needs, choosing where to screw them in. Screw the bolts from the outside and the nuts from the inside of the support.

At this point, the fun part: to mount the armrest over the handbrake, ensure it does not obstruct it, then screw the support to the plastic beneath the handbrake.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Fitting Roof Bars on a Fiat Panda 169
Fitting Roof Bars on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows how to fit roof bars on a Fiat Panda 169. This operation can be done without a mechanic and involves a few simple steps. Use a cross…
Fitting Roof Bars (Longitudinal) on Fiat Panda 169
Fitting Roof Bars (Longitudinal) on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video, learn how to install roof bars, or longitudinal bars, on a Fiat Panda 169 in simple and quick steps. First, remove the rubber screws f…
How to Replace the Timing Belt in the Fiat Panda 169?
How to Replace the Timing Belt in the Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) The timing belt is one of the most important components of a car's engine, and it must be replaced when the mileage indicated by the manufacturer is …

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos