Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Shark Fin Aerial on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Antenna

See other generations:
Video tutorial

This short video explains how to fit a shark fin aerial on a new Fiat Tipo (the procedure is the same for any car). First, clean the area around the aerial thoroughly, which is located on the rear of the roof. Next, unscrew the old aerial and screw in the new screw provided.

At this point, attach the adhesive to the bottom of the new aerial to ensure it adheres well to the bodywork. Now, place the washer and bolt that you received onto the screw.

Finally, remove the protective film from the adhesive and attach the new shark fin aerial to your Fiat Tipo (or any other car).


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Blade on a Fiat Tipo
How to Replace the Rear Wiper Blade on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) How to replace the rear wiper blade on a Fiat Tipo. Unscrew the nut located above the rear wiper blade. Grasp the rear blade with your hands and gent…
How to Remove the Original Radio from a Fiat Tipo
How to Remove the Original Radio from a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Here’s how to remove the original radio from a Fiat Tipo: Use a plastic lever to remove the trim surrounding the radio, then use a screwdriver to uns…
How to install dynamic side indicators on the Fiat Tipo
How to install dynamic side indicators on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Let's see how to install a very easy and inexpensive accessory that will also enhance the appearance of your Fiat Tipo, giving it a more modern look:…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos