Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Rear Shock Absorber of a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Shocks

Before you begin the replacement, ensure that your Fiat 500 is in first gear and the handbrake is engaged. Start by lifting the rear of the car, then remove the wheel by unscrewing the relevant bolts and pulling the wheel off. This will give you access to the rear shock absorber. Next, slightly lift the wheel hub with a jack to relieve the shock absorber. Then, unscrew the bolts securing the shock absorber to the car. Once these bolts are removed, the shock absorber will be free, and you can take it out, completing the disassembly. To fit the new shock absorber and reattach the wheel, simply reverse this procedure, and you will have finished the replacement.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shock Absorber of a Fiat 500
How to Replace the Front Shock Absorber of a Fiat 500
Fiat 500 (1957-1975 / Epoca) Before you can begin, lift the front end of your Fiat 500. Start by removing the front wheel by unscrewing the securing bolts. Next, using a jack, re…
How to Replace the Front Shock Absorber on a Fiat 500
How to Replace the Front Shock Absorber on a Fiat 500
Fiat 500 (2007-2024 / 312) You can replace the front shock absorber on a Fiat 500 by opening the bonnet to access the components in the engine bay: go to the side to locate the…
How to replace the rear shock absorbers on the Fiat 500 Abarth
How to replace the rear shock absorbers on the Fiat 500 Abarth
Fiat 500 (2007-2021 / ) In this video, you will see how to remove and replace the rear shock absorbers on the Fiat 500, in Abarth version; these components should be replace…

    Frequently Asked Questions

    • 500 2012-2023 - How much does it cost to change the Fiat 500 shock absorbers? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos