Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Shocks

You can replace the front shock absorber on a Fiat 500 by opening the bonnet to access the components in the engine bay: go to the side to locate the screws that secure the shock absorber from the top. Once these screws are loosened, remove the corresponding front wheel to access the screws of the shock absorber at the wishbones. By loosening these screws, the shock absorber can be removed, and the new one can be inserted and secured.

Posted on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shock Absorber of a Fiat 500
How to Replace the Front Shock Absorber of a Fiat 500
Fiat 500 (1957-1975 / Epoca) Before you can begin, lift the front end of your Fiat 500. Start by removing the front wheel by unscrewing the securing bolts. Next, using a jack, re…
How to Replace a Rear Shock Absorber of a Fiat 500
How to Replace a Rear Shock Absorber of a Fiat 500
Fiat 500 (2007-2021 / 312) Before you begin the replacement, ensure that your Fiat 500 is in first gear and the handbrake is engaged. Start by lifting the rear of the car, then…
How to Remove the Front Headlamp of the Fiat 500
How to Remove the Front Headlamp of the Fiat 500
Fiat 500 (2007-2022 / 312) In today's tutorial, you will learn how to remove and replace the front headlamp of the Fiat 500 by following the instructions below. First, open the…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2012-2023 - How much does it cost to change the Fiat 500 shock absorbers? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos