Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Diesel Filter on a Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Diesel fuel filter

See other generations:
Video tutorial

Do you want to remove the diesel filter mounted on a Fiat Ducato? Here’s how to do it from within the dedicated compartment. First, lift the front bonnet and locate the diesel filter.

Disconnect the electrical connectors from the filter, remove all the circulation hoses, and unscrew the screws near the container where the diesel filter is located (you can uncover the cap without removing the entire filter). Remove the filter (replace it with a new filter).

Fit the filter into the associated diesel filter container (connect the hoses and cables) and tighten the appropriate bolts. Close the bonnet after replacement.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Fiat Ducato
How to Replace the Diesel Filter on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before starting, open the front bonnet of your Fiat Ducato. Begin by disconnecting the electrical connectors attached to the diesel filter, then disc…
How to Replace the Fuel Filter on a Fiat Ducato?
How to Replace the Fuel Filter on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To replace the fuel filter on a Fiat Ducato, open the bonnet to access the components in the engine bay. On the right side, just below the windscreen…
How do you replace the fuel filter of the Fiat Ducato?
How do you replace the fuel filter of the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) The operation of replacing the diesel filter of the Fiat Ducato requires opening the hood, so that it is possible to access the components located in…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos