Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How do you replace the diesel filter on a Fiat Ducato?

Fiat Ducato - Video tutorial

Model: Fiat Ducato X250 - Years 2006-2014
Part: Diesel filter
Operation: How do you replace the diesel filter on a Fiat Ducato?

In order to replace the diesel filter on the Fiat Ducato, you need to open the bonnet, so that you can access the components located inside the engine compartment: on the right-hand side of the latter, immediately below the windscreen on the driver's side , you will be able to locate the diesel filter. The latter must be extracted from inside its housing by unscrewing the screws that fix it and disconnecting the fuel cables; in this way it will be possible to insert the new diesel filter, connecting it and suitably fixing it to its seat.


Posted on 29 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Ducato 2006-2014 - Where is the Fiat Ducato diesel filter located? Read Answer
    • Ducato 2014-2023 - Where is diesel filter found on Fiat Ducato? Read Answer
    • Ducato 2002-2006 - Where is the Fiat Ducato 2.3 diesel filter positioned? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos