Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Onboard computer

In this video tutorial, you will see how to replace the fuel filter on a Fiat Ducato. First, purchase a new filter. Next, lift the bonnet and secure it with the appropriate prop. Remove the right headlamp for better access to the filter box and disconnect the electrical cable. Once the filter box is removed, unscrew the screws to open it and take out the old filter. After removing the old filter, pour filtered fuel into the filter box and then place the new filter inside the box. Screw the cover of the filter box back on. Reposition the box with the new filter in its original position and reassemble all parts in reverse order.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter in a Fiat Ducato Van?
How to Replace the Fuel Filter in a Fiat Ducato Van?
Fiat Ducato (2006-2014 / X250) Replacing the fuel filter in a Fiat Ducato van, as shown in this tutorial, is a very simple and quick task. Before proceeding, wait for the engine to…
How to remove the fuel filter sensor cap on the Fiat Ducato
How to remove the fuel filter sensor cap on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Let's see how to remove the cap of the fuel filter sensor on a Fiat Ducato 2.3. First, we need to locate the locking device: it is a yellow tab on th…
How to Replace the Fuel Filter on a Fiat Ducato?
How to Replace the Fuel Filter on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To replace the fuel filter on a Fiat Ducato, open the bonnet to access the components in the engine bay. On the right side, just below the windscreen…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos