Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Left Front Headlight on Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Headlight

In this video tutorial, you will learn how to remove and replace the front headlight on a Fiat 600, following these simple instructions. First, open the bonnet of your car and disconnect the electrical connector of the bulb; then remove the front indicator light, possibly using a flat screwdriver to help pull the internal spring. At this point, you can unscrew the headlight bolt located at the top using a 10 mm socket; all that's left is to pull the headlight out from the outside and replace it, as shown in the video!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Remove the Front Headlight of a Fiat Seicento
How to Remove the Front Headlight of a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before starting, open the front bonnet of your Fiat Seicento. Begin by unscrewing and removing the bolts that secure the front headlight to the car. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos