Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the lock cylinder on Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2021
Part: Door lock

In this video tutorial we will see how to disassemble and replace the lock cylinder on a Fiat 500 Abarth, following the instructions below. First we open the door and remove the side screws of the handle, using a torx screwdriver; then we remove the door panel by unscrewing all the fixing screws. Once removed, we release the lock cylinder, accessing it from inside the door, as shown in the video. We just have to remove the handle and reassemble everything, applying the reverse procedure of disassembly!

Posted on 22 January 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the external door handle of the Fiat 500 Abarth
How to remove the external door handle of the Fiat 500 Abarth
Fiat 500 (2007-2021 / ) In today's video tutorial we will see the main steps that will allow us to remove and replace the external handle of the front door of the Fiat 500 A…
Replacement of the cylinder of the door lock of the Fiat 500
Replacement of the cylinder of the door lock of the Fiat 500
Fiat 500 (2007-2022 / 312) Today we will see, in this short and simple guide, how to disassemble and replace the cylinder of the Fiat 500 door lock. First we open the front doo…
How to open the fuel tank cap of the Fiat 500 Abarth
How to open the fuel tank cap of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Today's instructions will show us how to open the fuel tank cap and the fuel door of the Fiat 500. First, let's move to the side and start by opening…

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos