Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the external door handle of the Fiat 500 Abarth

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Handle
Operation: How to remove the external door handle of the Fiat 500 Abarth

In today's video tutorial we will see the main steps that will allow us to remove and replace the external handle of the front door of the Fiat 500 Abarth. First we open the front door and start by removing the door panel; to do this, unscrew the screws located on the opening handle, releasing the panel on the sides to remove it, as shown in the video. At this point we unscrew the screws of the lock to extract the cylinder; we then remove the external handle, replacing it with the new one, following the video tutorial to the end!


Posted on 23 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos