Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacement of the cylinder of the door lock of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Lock
Operation: Replacement of the cylinder of the door lock of the Fiat 500

Today we will see, in this short and simple guide, how to disassemble and replace the cylinder of the Fiat 500 door lock. First we open the front door on the driver's side and start by disassembling and removing the door panel, removing the cover handle and unscrewing the panel screws; then we go to unscrew the screws of our lock, using a 10 mm key and disconnecting the electrical connector, and then remove the handle and the lock cylinder from the outside, as shown in the video. At this point we replace the lock with the new one, reassembling everything!


Posted on 29 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2023 - Why does the Fiat 500 lock not close? Read Answer
    • 500 1957-1975 - How to open the rear bonnet lock of a Fiat 500R? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos