Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Battery

See other generations:
Video tutorial

Lift the bonnet and place the support rod in position. The battery is held in place by a bracket with two 10 mm bolts: unscrew them and remove the bracket.

Next, unscrew the negative terminal bolt and disconnect it. Similarly, disconnect the positive terminal only afterwards. It's that simple! The job is done; you can now remove the old battery and insert the new one. For reassembly, proceed in reverse: connect the two terminals by tightening their bolts and finally screw the upper bracket back in.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Replacing the Battery on Fiat Punto
Replacing the Battery on Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replacing the battery is a straightforward procedure on almost all car models, including Fiat. With the engine off and the handbrake engaged, lift th…
Fuse Replacement on Fiat Grande Punto
Fuse Replacement on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Fuse replacement on the Fiat Grande Punto? Let's see where they are located. Open the door and enter the cabin, then open the glove compartment in th…
How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos