Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Change on Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Checks and maintenance

Lift the car with a jack. Unscrew the angled plug of the oil sump using a 12 mm Allen key and collect the used lubricant in a container (dispose of it properly). As shown in the video, unscrew the plug for the oil filler hole (this is at the top of the engine bay) and pour in some new oil to push out all the old oil. Once everything has drained, clean the plug/bolt of the drain hole and refit it. Unscrew the cartridge oil filter and insert the new one, then fill with new lubricant through the top hole in the engine bay.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Oil and Filter on a Fiat 600
How to Change the Oil and Filter on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Changing the engine oil and its corresponding filter is one of the easiest DIY maintenance tasks you can perform, but be sure to dispose of the waste…
How to Replace Brake Fluid on a Fiat 600
How to Replace Brake Fluid on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) See how to replace the brake fluid on a Fiat 600. Position your car on a column lift, raising it to a comfortable height for working. Unscrew the whe…
How to Replace the Air Filter on Fiat 600
Fiat Seicento (1998-2010 / MK 1) Let's replace the engine air filter on a Fiat 600: open the car door, pull up the engine cover release lever located at the bottom left of the dashbo…

Other guides you may be interested in

    Frequently Asked Questions

    • Seicento 1998-2010 - How to solve an electric driving problem on the Fiat 600? Read answer
    • Seicento 1998-2010 - What are the problems with the City mode of the Fiat Seicento? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos