Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Fluid on a Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake rotors

Video tutorial

See how to replace the brake fluid on a Fiat 600. Position your car on a column lift, raising it to a comfortable height for working. Unscrew the wheel bolts with a telescopic spanner or air drill and remove the wheel.

Then, connect the drain hose to the bolt located behind the caliper. Now, unscrew with a fixed spanner and let the used fluid drain into a container.

Once the used oil has drained, re-screw the caliper bolt and top up the reservoir located in the engine compartment. Finally, mount the wheel with the associated bolts.

Test the correct operation of the brake pedal.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Replacing the Air Conditioning Compressor on Fiat 600
Replacing the Air Conditioning Compressor on Fiat 600
Fiat Seicento (1998-2010 / MK 1) How to replace the compressor on your Fiat 600? The Seicento is not originally equipped for air conditioning, so to fit just the compressor, you need…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos