Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Gear Gaiter on Fiat Croma

Model: Fiat Croma MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Shifter boot

Video tutorial

You can pull the gaiter out of its housing simply by hand: if it's difficult, use a plastic wedge to help. The gear knob can be unscrewed easily: the thread is long, so you will need to unscrew it quite a bit. Once done, keep the spring in a safe place, lift the gaiter completely until you see the clip underneath that you need to cut. Proceed in reverse for fitting the new gaiter: insert it onto the lever, secure it with a new clip (cut off the excess), and insert it into the base.

Refit the spring and screw on the knob. Nothing easier, good luck!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replacing the Front Speakers in the Fiat Croma
Replacing the Front Speakers in the Fiat Croma
Fiat Croma (2005-2010 / MK 1) In this short and simple guide, you will discover the procedure necessary for removing and replacing the front speakers in the Fiat Croma. First, ope…
How to Dismantle the Air Filter on a Fiat Croma
How to Dismantle the Air Filter on a Fiat Croma
Fiat Croma (2005-2010 / MK 1) Before starting, open the bonnet of your Fiat Croma. Begin by loosening the screws that secure the hoses to the air filter block. Then, unscrew and r…
Remove the Original Radio from Fiat Croma
Remove the Original Radio from Fiat Croma
Fiat Croma (2005-2010 / MK 1) How to remove an original radio from a Fiat Croma? Follow these guidelines carefully to execute the removal. Use the original or aftermarket metal ke…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos