Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Logo on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Manufacturer emblem

Do you want to remove the manufacturer's logo from the car? Here’s how to take off the logo on the rear tailgate of the Punto. Open and lift the rear tailgate, then remove the internal cover of the tailgate: take off the plastic parts and the securing screws. Unscrew the metal screws using a socket spanner (as shown in the video). Once the metal piece is detached, remove it from its seat and prepare to fit the new logo. Secure the badge perfectly in the logo holder of the tailgate: push with your hands until the badge fits snugly into the logo holder (tighten the screws at the back). Finally, check that the logo is properly secured.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Position the Logo and Third Brake Light on a Fiat Grande Punto?
How to Position the Logo and Third Brake Light on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To restore the third brake light, first retrieve the wiring from the boot gap, connect the two-pin connector correctly, and reposition the third brak…
Replacing the Front Badge/Logo on a Fiat Grande Punto
Replacing the Front Badge/Logo on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will learn how to remove and replace the badge or logo of the manufacturer on a Fiat Grande Punto, as well as on a Punto Evo. F…
How to Personalise the Fiat Logo on Your Car
How to Personalise the Fiat Logo on Your Car
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, see how to personalise the Fiat logo on a Grande Punto. First, the YouTuber uses a hairdryer to remove only the part with the "Fiat" l…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos