Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Personalise the Fiat Logo on Your Car

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Manufacturer emblem

In this video, see how to personalise the Fiat logo on a Grande Punto. First, the YouTuber uses a hairdryer to remove only the part with the "Fiat" lettering from the badge, without taking off the entire emblem, both from the front and rear. With great patience, he then removes the paint residue from the plastic ring, leaving the silver lettering intact. Using a clever method, he covers the outer part with masking tape to prevent it from getting dirty, then attaches a stick and sprays black paint on the inner part. He applies two or three coats, allows it to dry well, and achieves an excellent result. He removes the remaining glue from the badge that should hold the ring, which remained on the car, then spreads silicone glue and refits the ring with the lettering. Excellent result!

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Logo on a Fiat Punto
How to Remove the Logo on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Do you want to remove the manufacturer's logo from the car? Here’s how to take off the logo on the rear tailgate of the Punto. Open and lift the rear…
How to Position the Logo and Third Brake Light on a Fiat Grande Punto?
How to Position the Logo and Third Brake Light on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To restore the third brake light, first retrieve the wiring from the boot gap, connect the two-pin connector correctly, and reposition the third brak…
Restoring the Logo and Grille on a Fiat Grande Punto
Restoring the Logo and Grille on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Let’s see how to restore the logo and grille of a Fiat Grande Punto: For about £15.00, you can buy a grille on eBay. The YouTuber modified the grille…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos