Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Antenna and Antenna Cable on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Antenna

As shown in the video, remove the two rear round fixing clips and the side coat hook (which needs to be slightly unscrewed) using a plastic lever. Pull the rear part of the headlining down just enough to see the antenna cable, which you can disconnect by releasing the clip with a flat screwdriver and then pulling it out by hand. Unscrew the lower bolt of the antenna and remove it. Position the new antenna in place, screw it in from underneath, and reconnect the cable. Proceed in reverse order until fully reassembled, then insert the headlining back in place and fit the round clips that secure it.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the car radio in the Fiat 500?
How do you replace the car radio in the Fiat 500?
Fiat 500 (2007-2024 / 312) The video presented here serves as a real guide to replacing the stock car radio with an aftermarket one, specifying that the car on which the work w…
Removing the Antenna from a Fiat 500
Removing the Antenna from a Fiat 500
Fiat 500 (2007-2021 / 312) Do you want to replace the antenna on your Fiat 500? Unscrew the antenna from the base and then open the tailgate. Detach the clips from under the co…
Where to Find the Bluetooth Module on the Fiat 500
Where to Find the Bluetooth Module on the Fiat 500
Fiat 500 (2007-2024 / 312) On the Fiat 500, whether petrol or diesel, the Bluetooth module is not located in a fixed place but depends on the type of system fitted to your car.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos