Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Key

The battery of the Fiat 500X remote is located on the back of the remote. To open the device, extract the flip key and, using a small flathead screwdriver, lever on the two tabs located on the edge of the key recess. At this point, you can open the battery compartment cover (by turning it with the screwdriver or a coin) and replace the CR2032. Following the same procedure in reverse, you can reassemble the remote. The operation is now complete. The tool used for this operation is a small flathead screwdriver.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Fiat 500X Remote Control
How to Replace the Battery in a Fiat 500X Remote Control
Fiat 500 (2014-2022 / 500 X) Follow these steps to replace the battery in a Fiat 500X remote control: Take the remote and extract the metal key (located in the cover). Once the m…
How to replace the remote control battery of the Fiat 500X?
How to replace the remote control battery of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) Replacing the flat battery of the Fiat 500X remote control is a very simple operation, as shown in the attached video guide, which is valid for both …
How to Change the Battery in a Fiat 500X Remote
How to Change the Battery in a Fiat 500X Remote
Fiat 500 (2014-2022 / 500 X) Learn how to change the battery in a Fiat 500X remote (this procedure also applies to the remotes for Freemont, Punto, and Tipo). First, remove the p…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos