Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror Cap on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Side mirror

See other generations:
Video tutorial

To remove the cap, you can either detach the mirror or try to do it while it is still on your car. We will follow the second option. Fold the wing mirror inwards, then insert a plastic spatula under the plastic and lever it off, using a flat screwdriver if necessary.

Perform this operation gently, going around the entire outer cover of the mirror. You will notice the plastic clips that held the cover attached to the mirror (there are five on the Bravo), and it is advisable to be gentle with these clips.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Removing the External Wing Mirror on Fiat Bravo
Removing the External Wing Mirror on Fiat Bravo
Fiat Bravo (1995-2001 / ) Is the wing mirror broken? Here’s how to remove and replace it on a Fiat Bravo. Use a screwdriver to pry between the edge of the mirror frame and the…
Removing the External Wing Mirror on a Fiat Bravo 2008
Removing the External Wing Mirror on a Fiat Bravo 2008
Fiat Bravo (2007-2014 / Bravo 2) In this video, learn how to remove the external wing mirror on a second-generation Fiat Bravo by following these simple instructions. First, open the…
Replacing the Glass of the External Rear-View Mirror on a Fiat Bravo 2
Replacing the Glass of the External Rear-View Mirror on a Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the glass of the external rear-view mirror on a Fiat Bravo second series, following …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos