Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Pump on a 2017 Fiat Ducato MultiJet

Model: Fiat Ducato X290 - Years 2014-2026
Part: Fuel pump

In this video tutorial, you will learn how to remove and replace the fuel pump or sender unit on a 2017 Fiat Ducato with a MultiJet engine. Locate the fuel pump at the rear of the vehicle; then remove the cover and disconnect the electrical connector of the fuel level sensor. At this point, disconnect the fuel hoses as shown in the video; now you can unscrew the locking ring of the pump using the appropriate tool or by tapping with two flat screwdrivers. Finally, extract the fuel pump and replace it with the new one!

Updated on 11 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
Replacing the Timing Belt on the Fiat Ducato 2.3 MultiJet
Replacing the Timing Belt on the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will learn how to remove and replace the timing belt on the Fiat Ducato 2.3 MultiJet, following the instructions below. F…
Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet
Fiat Ducato (2014-2026 / X290) In this guide, we will explore the steps to remove and replace the timing belt on a Fiat Ducato 2.3 MultiJet. First, open the engine bonnet of the ve…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos