|
Do it yourself
| |||
| ||||
How to Replace the Indicator Bulb of the Rear Light on a Fiat Multipla
Model: Fiat Multipla
MK 1
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Video tutorial
Before you start, open the rear hatch of your Fiat Multipla. Begin by unclipping and removing the covers for the screws and nuts that secure the light to the vehicle, located inside the boot area. Next, unscrew and remove the screws and bolts. After that, pull out the light unit, then disconnect the corresponding electrical connector to access the bulb holder. Proceed to unscrew and remove the screws that secure the bulb holder to the rear light. At this point, you will have reached the blown indicator bulb, which you can unclip and remove, successfully completing the disassembly. To fit the new bulb and reassemble everything, simply follow these steps in reverse, and you will have completed the replacement.
Updated on 12 April 2026 by ScegliAuto
Related tutorials
Fiat Multipla
(1998-2010 /
MK 1)
Today, learn how to remove and replace the rear headlamp bulb on the Fiat Multipla. First, open the boot and start unscrewing the plastic caps locate…
Fiat Multipla
(1998-2010 /
MK 1)
How to replace the front headlamp bulbs on Fiat Multipla. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secur…
Fiat Multipla
(1998-2010 /
MK 1)
In this video, see how to replace the fog light along with the bulb on Fiat Multipla. Prepare to remove the side fog light located on the bumper: uns…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |