Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LPG Filter on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

Before you start, open the bonnet of your Fiat Panda. Begin by unscrewing and removing the screw that secures the LPG filter to its mounting bracket, then move the bracket itself.

Next, release the clips that secure the hoses to the LPG filter, and then disconnect the hoses. This will free the filter itself.

At this point, you can remove the LPG filter, successfully completing the disassembly. To fit the new LPG filter, simply follow these steps in reverse, and you will have completed the replacement.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Why does the engine light come on in a 1.2 Panda with LPG?
Why does the engine light come on in a 1.2 Panda with LPG?
Fiat Panda (2003-2012 / 169, MK 2) In this video we see the reason why the engine light comes on when switching from petrol to LPG on a Panda 1.2: in fact, when switching from petrol t…
Replacing the LPG Filter on the Fiat Panda 169
Replacing the LPG Filter on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) It is recommended to change the LPG filter on the Fiat Panda with a Landi system every thirty thousand miles to ensure a clean fuel flow. To carry ou…
Problem with a Panda GPL with engine warning light on
Problem with a Panda GPL with engine warning light on
Fiat Panda (2003-2012 / 169, MK 2) In this video we see a Panda with a LPG system in which the engine light only comes on when running on LPG, while it immediately goes off when runnin…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos