Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the LPG filter of the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Checks and maintenance

Every thirty thousand kilometers it is recommended to change the LPG filter on a Fiat Panda with a Landi system in order to ensure a clean fuel flow. To perform the replacement, we open the front hood, locate the filter on the passenger side, disconnect the clamps on the hose connections and remove the hoses, remembering the direction of the flow. Using a 10mm wrench, we loosen the bolt of the mounting bracket and remove the filter body, insert the new one paying attention to the orientation, insert the hoses, tighten the clamps and the bracket bolt.

Posted on 24 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) In this video we see a Panda with a LPG system in which the engine light only comes on when running on LPG, while it immediately goes off when runnin…
Fiat Panda (2003-2012 / 169, MK 2) Before you start, open the bonnet of your Fiat Panda. Begin by unscrewing and removing the screw that secures the LPG filter to its mounting bracket,…
Fiat Panda (2003-2012 / 169, MK 2) In this video we see the reason why the engine light comes on when switching from petrol to LPG on a Panda 1.2: in fact, when switching from petrol t…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos