Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mirror Cap on Fiat Doblò and Opel Combo

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Side mirror

Before proceeding to the mirror, remove the door panel by taking off the two round covers located behind the window switch and unscrewing the two underlying T40 Torx screws. While removing the panel, disconnect the connector and the lock cable. Now remove the plastic cover on the front pillar of the door using a plastic lever. Once done, you can remove the three T40 Torx bolts that secure the mirror cap to the vehicle and, again, disconnect the cables. Reverse the process for reassembly. Good luck!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the glass of the exterior rearview mirror of the Fiat Doblò.
How to replace the glass of the exterior rearview mirror of the Fiat Doblò.
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In a few simple steps, we will dismantle and replace the glass of the external rearview mirror of the Fiat Doblò. First, let's move to the side of th…
Replacing the Engine Air Filter on a Fiat Doblò
Replacing the Engine Air Filter on a Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Lift the bonnet and secure it. Replacing the engine air filter on an Opel Combo or Fiat Doblò is really a simple and straightforward task. Unscrew th…
What is the Fuse Diagram for the Fiat Doblò
What is the Fuse Diagram for the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In today's video, we will look at the complete fuse diagram and their location in the second series of the Fiat Doblò. This tutorial also applies to …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos