Removing the Heating Radiator on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Heater core

See other generations:

This video is currently unavailable

Remove the gear lever gaiter, unscrew all related screws as shown in the video. Pull the plastic beneath the gaiter and remove it. Remove all the plastic related to the gear lever by unscrewing the two star screws and taking off the rest of the plastic that is simply clipped in place.

Now the heating radiator is visible, on the driver's side. Remove the protective cover by unscrewing the three hex screws, and disconnect the connector.

Unscrew the 4 Torx screws related to the upper frame of the instrument panel, and remove the 3 screws of the panel itself without taking it out. Unscrew another 3 screws related to the cover under the steering wheel. Once all the steering wheel plastics are removed, you can gently slide the radiator out, holding it up with your right hand while pulling it with your left.

Updated on 13 April 2026 by ScegliAuto

Other guides you may be interested in

Radiator - Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

Steering Wheel - Maintenance and repair on other vehicles

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!

by ScegliAuto

Removing the Heating Radiator on a Fiat Panda

Related tutorials

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

More videos