Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Headlight bulb

Before you can start, open the bonnet of your Fiat Ducato. Begin by unscrewing and removing the screws that secure the headlight to the van. Next, unclip and remove the headlight, then disconnect the electrical connector. This will give you access to the rear cover of the blown bulb. Proceed to unclip and remove the cover. After that, disconnect the connector of the blown bulb, unclip it, and remove it. Once you have completed this step, the disassembly will be finished. To fit the new bulb, simply reverse these steps, and you will have completed the replacement.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Fiat Ducato
How to Replace the Front Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) To replace the front headlamp bulb on a Fiat Ducato, open the bonnet to access the components inside the engine bay. Specifically, you need to reach …
Replacing the Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) How do you replace the headlamp bulb on a Ducato? Lift the bonnet and find the back of the front headlamp. You can remove the front headlamp if space…
How to Replace the Rear Light Bulb on a Fiat Ducato
How to Replace the Rear Light Bulb on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) To replace the rear light bulb on a Fiat Ducato, open the rear door to access the internal plastic panel corresponding to the light. By detaching thi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos