Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Fiat Punto 188

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

In this simple guide, learn how to remove and refit the front door panel on a Fiat Punto 188, second series. First, open the front door and start by unscrewing all the fixing screws found on the sides of the panel using a cross-head screwdriver; then remove the plastic caps to unscrew the hex screws inside the holes, as shown in the video.

At this point, remove the handle cover and the plastic cover of the tweeter; now begin to lever on the sides of the panel to detach it, then disconnect the handle cable!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Removing the Front Door Lock on a Fiat Punto 188
Removing the Front Door Lock on a Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) In today's video, you will learn how to remove the front door lock on a Fiat Punto 188 by following these simple steps. First, open the front door an…
Replacing Door Panel on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Remove the door panel of a Fiat Punto to replace it or work inside. Use a screwdriver to undo the screws on the door panel (top side of the door open…
Removing the Front Door Panel of the Fiat Punto
Removing the Front Door Panel of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide shows you how to remove and replace the front door panel of the Fiat Punto, following the instructions below. First, open the front door a…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos