Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Lock in a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Door lock

See other generations:
Video tutorial

Before you start, open the door of your Fiat Panda. Begin by removing the door panel, taking off the window winder and unscrewing the securing screws.

Next, detach the linkages connected to the lock. After that, unscrew and remove the internal screws that secure the lock to the door.

This will free the door itself. Proceed to disengage and extract the lock from the door, and you will have completed the disassembly.

To fit the new lock, simply follow this procedure in reverse, and you will have completed the replacement.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Program the Key for a Fiat Panda?
How to Program the Key for a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To program the key for a Fiat Panda, insert the key you wish to program into the ignition switch, turning it to position two to power on the dashboar…
How to Replace the Rear Light Bulb on a Fiat Panda?
How to Replace the Rear Light Bulb on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear light bulb on a Fiat Panda, open the boot to access the two bolts located between the seal and the light. Once these are loosened…
How to Replace the Side Indicator Bulbs on the Fiat Panda
How to Replace the Side Indicator Bulbs on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to remove and replace the side indicator bulbs on the Fiat Panda, following the instructions below. First,…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos