Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on Fiat Punto 2

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Headlight bulb

Today, we will see the instructions on how to remove and replace the dipped beam bulb of the front headlight on a second series Fiat Punto, in simple steps. First, open and lift the engine bonnet of your car and open the rubber protective cap of the bulb; then disconnect the electrical connector and unclip the metal spring to extract it. At this point, replace it with the new one of the correct type (in this case, an H1) and reconnect the electrical connector and secure the spring: then check its operation!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
How to Replace the Front Headlamp Bulbs on a Fiat Punto
How to Replace the Front Headlamp Bulbs on a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) How to replace the front headlamp bulbs on a Fiat Punto? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the …
How to Replace the Headlight Bulbs on a Fiat Punto
How to Replace the Headlight Bulbs on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Learn how to replace the headlight bulbs on a Fiat Punto. Open the front bonnet (pulling the lever located at the bottom right of the dashboard) and …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos