Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Cabin air filter

This guide shows how to replace the cabin air filter on the Fiat Ducato 2.3 MultiJet. The first step is to open the glove compartment and unscrew all the fixing screws. Remove the glove compartment and set it aside. For this last step, you need to unscrew some Torx25 screws located in the rear compartment of the glove box. At this point, you can work on the pollen filter by unscrewing the two hex screws and opening the access flap. Pull out the old filter and replace it with the new one. The reassembly procedure is the same as disassembly but in reverse order.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Fiat Ducato.
How to replace the cabin air filter of the Fiat Ducato.
Fiat Ducato (2006-2014 / X250) Today we will explain how to replace the cabin air filter of the Fiat Ducato. On this type of vehicle, the filter is located inside the central tunne…
Replacing the Cabin Filter on a Fiat Ducato
Replacing the Cabin Filter on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) .. In this video, you will learn how to replace the cabin air filter on a Fiat Ducato from 2006 onwards. First, you need to know that.. …
How to replace the air filter of the Fiat Ducato
How to replace the air filter of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) If you need to replace the engine air filter of your Fiat Ducato on your own and do not know how to do it, do not worry because you just need to foll…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos