Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repairing the Gaiter and Knob on Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Shift knob

Video tutorial

To remove the gear gaiter, loosen the grip of the lower clips that hold it in place using a small flat screwdriver. Do this patiently and gently, lifting the gaiter a little at a time from its housing.

At this point, open the button and the gaiter tear and pull it off from the top, passing it around the knob. If you wish to change the knob as well, simply unscrew it from the main gear shaft and screw on the new knob.

To fit the new gaiter, just slide it on, passing it around the knob, and press the clips into place at the base.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Removing Cigarette Lighter Bulb from Fiat 600
Removing Cigarette Lighter Bulb from Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video, you will see how to replace the cigarette lighter bulb of the Fiat 600. First, remove the 25 Amp fuse to work safely. Start by removin…
How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos