Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on a Fiat Ducato?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Clutch

To replace the clutch cable on a Fiat Ducato, first remove the damaged old cable by extracting it from its seat. To insert the new part, feed the wire and rubber grommet through the hole shown in the video. Next, the cable must be inserted into the second grommet, located near the front right wheel, and you must also remove the part of the dashboard under the steering wheel. This will allow you to fully lift the clutch pedal and insert the cable into the appropriate hook. Finally, reassemble all the removed parts.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shock Absorber on a Fiat Ducato
How to Replace the Front Shock Absorber on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) To replace the front shock absorber on a Fiat Ducato, lift the vehicle so that the wheels are off the ground. This will allow you to loosen the bolts…
How to Replace the Cabin Fan Resistor on a Fiat Ducato Camper
How to Replace the Cabin Fan Resistor on a Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) This guide will show you how to disassemble and replace the cabin fan resistor on a Fiat Ducato in simple steps. First, get inside the vehicle and st…
How to Clean the Water Filter of a Fiat Ducato Rimor
How to Clean the Water Filter of a Fiat Ducato Rimor
Fiat Ducato (2002-2006 / ) Before you can begin, enter the living area of your Fiat Ducato Rimor and remove the bench seat from the main table by simply lifting it. Start by di…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos