Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Servicing the Fiat Tipo 356 1.6 MultiJet

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Engine oil

Here are the instructions for performing the routine service, replacing the engine oil and oil filter, on the Fiat Tipo 356 with a 1.6 MultiJet engine. First, lift the vehicle and start by removing the plastic protective cover found underneath; then unscrew the oil drain bolt located on the sump using a socket spanner. Now, replace the bolt and change the oil filter; finally, remove the dipstick from the filler hole and fill to the maximum level (approximately 5 litres of oil).

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter in the Fiat Tipo 1.6 MultiJet
How to replace the engine oil and oil filter in the Fiat Tipo 1.6 MultiJet
Fiat Tipo (2016-2026 / 356, 357, 358) In this guide, you will discover the instructions to perform the routine maintenance service by replacing the engine oil and oil filter in the Fiat T…
How to Replace the Gearbox Oil on a Fiat Tipo 356
How to Replace the Gearbox Oil on a Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) In this video, learn how to service the transmission by replacing the gearbox oil on a Fiat Tipo 356, following these simple steps. First, open the b…
Guide to replacing the timing belt of the Fiat Tipo 1.6 Multijet
Guide to replacing the timing belt of the Fiat Tipo 1.6 Multijet
Fiat Tipo (2016-2026 / 356, 357, 358) Today we will discover the instructions that will allow us to disassemble and replace the timing belt of the Fiat Tipo 1.6 Multijet. First of all, we…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos