Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement.

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Cabin air filter

The cabin air filter is located beneath the plastic cover positioned just below the windscreen, on the passenger side, directly in line with the wiper blade. Remove the cover cap of the filter housing and proceed with the replacement: once the old filter is removed, ensure there are no dirt residues in the housing and insert the new one, respecting the airflow direction. It is advisable to perform this operation every 15,000 miles or at least once a year to prevent the formation of mould.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Fiat Multipla
How to Replace the Cabin Air Filter in a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before you begin, exit the cabin of your Fiat Multipla and lift the front wipers. Start by prying off and removing the outer cover of the air filter …
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Fiat Multipla (1998-2010 / MK 1) The cabin air filter is located just below the windscreen on the passenger side: remove the plastic protective grille to access the filter housing; t…
How to Replace the Cabin Pollen Filter on a Fiat Multipla
How to Replace the Cabin Pollen Filter on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) How to replace the cabin pollen filter on a Fiat Multipla? In this video, see how to perform the removal. Use a lever to remove the plastic cover und…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos