Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Fiat Multipla

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Cabin air filter

Before you begin, exit the cabin of your Fiat Multipla and lift the front wipers. Start by prying off and removing the outer cover of the air filter using a flat-head screwdriver. Next, unscrew and remove the screws that secure the inner cover of the filter, then remove the cover itself. This will give you access to the cabin air filter, which you need to extract and remove, completing the disassembly. To install the new air filter, simply follow these steps in reverse, and you will have completed the replacement.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Fiat Multipla located?
Where is the OBD port of the Fiat Multipla located?
Fiat Multipla (1998-2010 / MK 1) If you own a Fiat Multipla and want to locate the OBD port of the vehicle, all you have to do is carefully read the following guide and follow the st…
How to Remove the Battery from a Fiat Multipla
How to Remove the Battery from a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…
How to Replace the Front Headlamp Bulbs on a Fiat Multipla
How to Replace the Front Headlamp Bulbs on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop. Locate the inspection caps for t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos