Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Tyre Light on the Fiat Qubo

Model: Fiat Qubo MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

Video tutorial

How do you reset the light on the Fiat Qubo? Turn on the ignition and reset the light. Inflate the tyres before performing the reset.

Enter the cabin of the Qubo, press the "Set" button located on the side of the dashboard, then, once in the settings menu, scroll up/down until you find "Reset Tyres": select it with the Set button to turn off the tyre pressure warning light, then exit the settings menu after completing the setting.

Check the information display for various car info.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Fiat Qubo?
How to Reset the Service Light on the Fiat Qubo?
Fiat Qubo (2008-2019 / MK 1) To reset the Service light that appears on the instrument panel of the Fiat Qubo, connect a diagnostic tool to the vehicle's OBD port, which is locat…
How to Reset the Service Light on a Fiat Qubo 1.3 Multijet
How to Reset the Service Light on a Fiat Qubo 1.3 Multijet
Fiat Qubo (2008-2019 / MK 1) Today's guide will show you how to reset the maintenance light for the oil change on the Fiat Qubo 1.3 Multijet. First, get in the vehicle and turn o…
Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos