Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Qubo 1.3 Multijet

Model: Fiat Qubo MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

Video tutorial

Today's guide will show you how to reset the maintenance light for the oil change on the Fiat Qubo 1.3 Multijet. First, get in the vehicle and turn on the ignition; then press and hold the accelerator pedal while simultaneously pressing the brake pedal seven times, as shown in the video.

At this point, turn off the ignition and wait sixty seconds before turning it back on; this way, you will see that the engine oil light will be reset from the instrument panel when you start the engine!


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Fiat Qubo 1.3 MultiJet?
How to reset the "Service" light on a Fiat Qubo 1.3 MultiJet?
Fiat Qubo (2008-2019 / MK 1) Before you can start, sit in the driver's seat of your Fiat Qubo. Begin by activating the vehicle's instrument panel. Next, press and hold the accele…
How to Reset the Service Light on the Fiat Qubo?
How to Reset the Service Light on the Fiat Qubo?
Fiat Qubo (2008-2019 / MK 1) To reset the Service light that appears on the instrument panel of the Fiat Qubo, connect a diagnostic tool to the vehicle's OBD port, which is locat…
Reset Tyre Light on the Fiat Qubo
Reset Tyre Light on the Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) How do you reset the light on the Fiat Qubo? Turn on the ignition and reset the light. Inflate the tyres before performing the reset. Enter the cabin…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos