Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Tipo
    4. : Fiat Tipo engine air filter replacement

Fiat Tipo - Video tutorial

Model: Fiat Tipo 358, 357, 356 - Years 2016-2023
Part: Air filter
Operation: Fiat Tipo engine air filter replacement

Unscrew the three screws of the air duct with a 7 wrench, as shown in the video. Then unscrew the two nuts holding the air filter cover in place. VoilÃ! Here is the much sought after filter in front of you. To replace it, simply remove it from its seat and carefully position the new filter. Put the cover back on making sure that the three tabs of the cover match the external structure, then insert the duct into the housing and screw in the various bolts. Start the car making sure there are no strange noises. It is therefore a matter of a few minutes. Good job!


Posted on 28 February 2024 by ScegliAuto



Replacement of the Fiat Tipo air filter
Fiat Tipo (2016-2023 / 358, 357, 356) Let's see the necessary instructions on how to disassemble and replace the Fiat Tipo engine air filter, following these simple and quick steps. First
How to replace the air filter in the Fiat Tipo?
Fiat Tipo (2016-2023 / 358, 357, 356) As we can see in this tutorial, replacing the air filter in your Fiat Tipo is an extremely simple and fast operation. Before proceeding, make sure th
How to replace the cabin air filter on a Fiat Tipo.
Fiat Tipo (2016-2023 / 358, 357, 356) The replacement of the cabin air filter on your new Fiat Tipo is an easily achievable task for anyone, despite the fact that the component is quite h

    Frequently Asked Questions

    • Fiat Tipo 2016-2023 - Where is the Fiat Tipo engine air filter located? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos