Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan resistor on the Fiat Freemont - Dodge Journey

Model: Fiat Freemont MK 1 - Years 2011-2016

In today's video tutorial, you will see the main steps to disassemble and replace the cabin fan resistor on the Fiat Freemont, as well as on the Dodge Journey. First, open the front door and access the passenger side; remove the glove compartment by unscrewing all the fixing screws. At this point, access the cabin fan housing; locate the resistor, disconnect the electrical connector, and unscrew the fixing screws to remove it. Finally, replace it with the new one by applying the reverse procedure!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on the Dodge Journey - Fiat Freemont
Replacing the Cabin Fan Resistor on the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. remove and replace the cabin fan resistor on the Dodge Journey, as well as on the Fiat Freemont. First, get inside the vehicle and remove the glove compartment.. …
How to Remove the Radiator Fan on Dodge Journey - Fiat Freemont
How to Remove the Radiator Fan on Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. to remove the engine cooling radiator fan on a Dodge Journey, as well as on a Fiat Freemont. First, open the bonnet of your car and begin by removing.. …
Removing the Climate Control Controls on a Dodge Journey - Fiat Freemont
Removing the Climate Control Controls on a Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. how to remove the climate control controls on a Dodge Journey and a Fiat Freemont, as they are the same car models. First, get into the vehicle and.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos