Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Reassembly of the Fiat 500 Key Fob

Model: Fiat 500 312 - Years 2007-2021
Part: Key

In this video, you will learn how to disassemble and replace the shell of the key fob for the Fiat 500, as well as the 500L. First, take your key fob and start by removing the cover of the key shell, using something thin to pry at the sides. Next, unscrew the fastening screw of the fob to remove the battery compartment, as shown in the video. At this point, remove the circuit board, the key, and the transponder, transferring everything to the new key shell. Follow the video tutorial to the end for reassembly!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Vents on a Fiat 500L
How to Remove the Air Vents on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this short video tutorial, see the instructions for removing the air vents on a Fiat 500L in simple and quick steps. First, get inside the vehicle…
Removing the Rear Seat of the Fiat 500
Removing the Rear Seat of the Fiat 500
Fiat 500 (2007-2021 / 312) Removing the rear seat of the Fiat 500? Open the boot lid and lower the seatbacks. Unscrew the securing pins located at the sides of the metal guides…
Fitting Roof Bars on Fiat 500
Fitting Roof Bars on Fiat 500
Fiat 500 (2007-2021 / 312) Let's look at fitting roof bars on a new model Fiat 500. Install the roof bar kit (as shown in the video) with the bars adjusted to the width of the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos