Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to remove the front seats on the Fiat Grande Punto - Punto Evo

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Seat
Operation: How to remove the front seats on the Fiat Grande Punto - Punto Evo

In this video tutorial we will see how to remove the front seat on the Fiat Grande Punto, but also on the Punto Evo, in simple and quick steps. First of all we open the front door and start by unscrewing all the fixing screws that we find on the seat guides; to do this we use a torx wrench or screwdriver, as shown in the video. At this point we can lift the seat, disconnecting the electrical connector of the seat belt that we find under the plastic cover; then we permanently remove the seat. Reverse the procedure for reassembly!


Posted on 2 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Why doesn't the seat of the Fiat Punto slide? Read Answer
    • Punto 1999-2011 - What to do if the seat belt gets stuck in the Fiat Punto? Read Answer
    • Punto 1999-2011 - How to adjust the driver's seat on Fiat Punto street? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos