Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the dashboard bulbs (climate controls) on a Fiat Panda 3

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Instrument panel light

See other generations:
Video tutorial

In this video tutorial, you will learn how to dismantle and replace the dashboard bulbs, specifically those for the climate control on the third generation Fiat Panda. First, get in the car and start by pulling the knobs towards you to remove them from their housing; this will give you access to the climate control bulbs, as shown in the video.

At this point, remove and replace the bulbs with new ones of the correct type; insert them properly into the sockets and reassemble everything by applying the reverse procedure.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Remove the Climate Control Knobs on Panda
Remove the Climate Control Knobs on Panda
Fiat Panda (2012-2026 / 319, MK 3) Remove the climate control knobs from the Fiat Panda? Remove the knobs if you need to replace them or the bulbs inside. Locate the panel with the ven…
Replacing the Climate Control Bulb on the Fiat Panda
Replacing the Climate Control Bulb on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) If the bulb illuminating the climate control on the Fiat Panda's dashboard burns out, replace it to restore nighttime visibility. Use two plastic lev…
How to Retrieve the Dashboard Bulbs in the Fiat Panda
How to Retrieve the Dashboard Bulbs in the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In today's video, see how to retrieve the light supports for the dashboard in the Fiat Panda 169. First, remove the climate control knobs from their …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos